Jet Plans:

Airliner
Designer: mcross
Designer Email: mcross at RCGroups
Specs: 14 inch wingspan, 16.5g AUW
Material Required: 2mm Depron
Downloads available:
Notes: Mike has created a nice looking airliner! I have created three graphic schemes for Mike's plane for download. If you create any others please feel free to submit them so they may be added. The drawings call for two fuselages to be cut out and bonded together for added strength. You may also consider using either a small carbon fiber ribbon along the bottom edge of the fuselage or balsa to do the same. This might reduce the AUW.

Cutlass
Designer: nitrostar
Designer Email: nitrostar at RCGroups
Specs: 16 to 18 grams AUW
Material Required: 3mm Depron
Downloads available:
Notes:

Cutty
Designer: relaxr
Designer Email: relaxr at RCGroups
Specs: 10 inch Wingspan
Material Required: 2mm Depron
Downloads available:
Notes: Designed from a prototype the author dissected. Cool plane.

Eurofighter
Designer: streff
Designer Email: streff at RCGroups
Specs: 10 inch wingspan
Material Required: 2 - 2.5 mm Depron
Downloads available:
Notes: Tape together the PDF at the edges of the paper, don't overlap, or shrink to fit page when printing. The author may soon be kitting this model. Nice video.

F-15
Designer: Megabyte-2
Designer Email: Megabyte-2 at RCGroups
Specs: 7.5 inch wingspan, 10.57g AUW
Material Required: 2mm Depron
Downloads available:
Notes: This F 15 is fast. Flying just below 1/2 throttle. Designed for a 90ma Lipo.

FW Ta283 Plan
Designer: FidlerEd
Designer Email: FidlerEd at RCGroups
Specs: Unknown
Material Required: 2mm Depron
Downloads available:
Notes: Design proposed by author. Has yet to fly.

Harpy Cat
Designer: Chara
Designer Email: Chara at RCGroups
Specs: Scaled down to 12 inches from original print
Material Required: Unknown
Downloads available:
Notes: Information is sketchy on this design. The author never posted if adapting to AA gear was sucessful or not.

ME163 Kraftei
Designer: Christian Bürger
Designer Email: Author home page
Specs: Pylon Racing Jet
Material Required: 2 or 3mm Selitron (Depron)
Downloads available:
Notes: Here are Christian Bürger notes on this design: "..we made coloured plans in several designs. You can print them on light paper, put them onto the Depron and Selitron and have a nice flyer without need to draw the design by yourself. There are four different designs. Unfortunally we took very heavy paper for the prototype, which was only flyable with a full battery. If you don't have light paper it is better to reduce the plan by 10% to make it lighter" Thanks again Christian! Note: The BMP link contains the fourth PDF design.

Selfo Jets
Designer: Selfo Jets
Designer Email: Selfo Website: www.selfo.com
Specs: 12 inch Wingspan
Material Required: 2mm Depron
Downloads available:
Notes: Until recently Selfo's plans were available for free. This unit soon to be kitted by author. Go to www.selfo.com for further details.

SkyRay
Designer: FidlerEd
Designer Email: FidlerEd at RCGroups
Specs: 10 inch Wingspan, 18 grams AUW
Material Required: 2mm Depron
Downloads available:
Notes: This airframe has an airfoil to assist in flight. The downloadable graphic can be printed on mat tracing paper and glued to the airframe.

Strykerish
Designer: MiseryQ
Designer Email: MiseryQ at RCGroups
Specs: Two designs, 9.5 and 12 inch Wingspan
Material Required: 3mm CellFoam88
Downloads available:
Notes: The 9.5" was a little squirmish and needed almost full throttle to stay flying so the larger version should have more lift. Authors note: Both models took full throttle to stay in the air, so you may have to do some work with this design. 2mm Dupron may help.

The Alleycat
Designer: Racerx208
Designer Email: Racerx208 at RCGroups
Specs: 12 inch Wingspan, 17 grams AUW
Material Required: 2mm Depron
Downloads available:
Notes: A smooth flying jet....

The Alleycat (3mm)
Designer: nitrostar
Designer Email: nitrostar at RCGroups
Specs: 11.5 inch Wingspan
Material Required: 3mm Depron
Downloads available:
Notes: ....like the 2mm version, a really smooth flyer....

The Alleycat (3mm, 10 inch)
Designer: nitrostar
Designer Email: nitrostar at RCGroups
Specs: 10 inch Wingspan
Material Required: 3mm Depron
Downloads available:
Notes: 10 inch version of Alleycat.

The Lite-Jet
Designer: Racerx208
Designer Email: Racerx208 at RCGroups
Specs: 12 inch Wingspan, 15.8 grams AUW
Material Required: 2mm Depron
Downloads available:
Notes: Available soon.

Vulcan
Designer: relaxr
Designer Email: relaxr at RCGroups
Specs: AUW less than 19 grams
Material Required: 2mm Depron
Downloads available:
Notes: Nice looking Vulcan bomber