Beyond Art and Imagination Plans:

Bald Eagle Designer: Astrodavid Designer Email: Astrodavid at RCGroups Specs: 21 inches WS,21g AUW Material Required: Depron 2 and 3 mm Downloads available:

Notes: I built a profile Bald Eagle using AA/X-twin components, and it is a great flyer! The wingspan is 21 inches and weight 21 grams.

Bubble Mod Designer: lukibob Designer Email: lukibob at RCGroups Specs: Bubble Trails for you AA!! Material Required: Ring from a Key Chain Downloads available:

Notes: Here is lukibob's Bubble mod. The ring is a from a key chain, the spiral wound ones that come on free keychains. It has to hang down so you can dip it in a small cup. Luki says the hard part is keeping everything else from getting all soapy!

Hoop Skirt Designer: micro_builder Designer Email: Micro_Builder at RCGroups Specs: 24g AUW Material Required: Balsa and tissue paper Downloads available:

Notes: The hoop is 10 inches in diameter, total leangth is 18 inches, empty weight was just under 14 grams, so my AUW should be around 24(grams). It glides amazingly well, much slower than I was expecting, seemed very stable as well. I gave it some throttle after seeing that it was stable enough to fly and it cruised nice and straight, but steering response seemed quite sluggish. The long tail moment and huge rudders are probably playing a big role there, so I'll probably cut the rudders down some.

Lame Duck Designer: RolfPW Designer Email: RolfPW at RCGroups Specs: 288mm wingspan, 13.56g AUW Material Required: 2mm Depron Downloads available:

Notes: Can be printed on a DIN A4 sheet, it fits perfecly.

Pizza Box Flyer Designer: Leadfeather Designer Email: Leadfeather at RCGroups Specs: 14.7g AUW Material Required: 3mm EPP Downloads available:

Notes: A great indoor flyer from Leadfeather. The plan prints on two 8 1/2 x 11 sheets of paper. Check out the plan for build notes.

Platz Pelican Designer: sci fighter Designer Email: sci fighter at RCGroups Specs: Unknown Material Required: Depron 3 mm,EPP 9mm and 2mm Downloads available:

Notes: The power and control are directly taken from the Silverlit Aero Ace or X-twin plane. The fuselage was made from 9 mm EPP while the wings are made from 3 mm depron. The 2 stabilizer flaps attached on both sides on the lower wing are made with 2mm EPP. The EPP was chosen to withstand knocks and crashes

X-Falcon Designer: StephanB Designer Email: StephanB at RCGroups Specs: 550mm wing span, 245mm length Material Required: Depron, EPP Downloads available:

Notes: The author has a really great web site! Decals also available for the x-falcon. Many more designs and videos available at the authors site: www.stephanb.rchomepage.com